The 3‑jaw chuck is used to hold cylindrical workpieces. The chuck can be mounted directly to a base plate or, depending on requirements, with a horizontal axis using the R‑CJ‑84‑ST... Read more
| name | value |
|---|---|
| Centre height (mm) | 30 |
| Centre height (in) | 1.18 |
| Clamp type | 3-jaw clamp |
| Fixture type | Chucks |
| Height (in) | 2.18 |
| Material | Steel |
| Maximum inner diameter (mm) | 105 |
| Maximum inner diameter (in) | 4.13 |
| Maximum outer diameter (mm) | 102 |
| Maximum outer diameter (in) | 4.02 |
| Measurement system | Multiple |
| Minimum inner diameter (mm) | 7 |
| Minimum inner diameter (in) | 0.28 |
| Minimum outer diameter (mm) | 1 |
| Minimum outer diameter (in) | 0.039 |
| Pin height (mm) | 55 |
| Thread | Multiple |
The 3‑jaw chuck is used to hold cylindrical workpieces. The chuck can be mounted directly to a base plate or, depending on requirements, with a horizontal axis using the R‑CJ‑84‑STAND. The reversible jaw design allows parts to be clamped on either the outer or internal diameter. It accommodates diameters from Ø1 mm to Ø102 mm (outer) or Ø7 mm to Ø105 mm (internal). The chuck is suitable for use on CMMs, the Equator™ gauging system, and vision and multi‑sensor machines. It is a universal component compatible with thread sizes M4, M6, M8 and ¼‑20. Note: Chuck body is steel and jaws are aluminium.
1 product found
1 product found
